1. Set the power shuttle to position P.
If the main power shuttle lever is not in position P, the driving directions
cannot be engaged using the TwinTrac driving controls and the tractor will
not move.
2. Turn the driver's seat to the TwinTrac position.
You can now operate the tractor in the same way as with the normal driving
position.
3. To deactivate TwinTrac:
•
Set the TwinTrac power shuttle to position P.
•
Turn the driver's seat to the normal driving position.
3.8.23.3 Using TwinTrac with QuickSteer
You can use either the normal steering or the electrically controlled QuickSteer to
steer the tractor.
NOTE: When the driver's seat is turned to the TwinTrac driving position, the
steering valve is always on even if QuickSteer is not activated. In this case, the
slowest steering speed is used.
NOTE: If the light on the QuickSteer activation button or the Auto-Guide steering
valve ON/OFF button (optional equipment) is flashing, there is a fault in the
steering valve. A fault code is shown on the armrest display. Reset the steering
valve to recover from the fault.
1
2
GUID-45608A9D-6AA8-4806-A1E4-54CC1B43BFDF
1. QuickSteer control knob
2. QuickSteer activation button
1. Press the QuickSteer activation button to turn the steering valve on.
The QuickSteer activation button light is lit green, and the QuickSteer symbol
is lit on the Proline instrument panel.
2. Turn the QuickSteer control knob to set the QuickSteer steering speed.
Press the QuickSteer activation button again to turn the steering valve off.
3. Operation
- 156 -
Summary of Contents for Versu N Series
Page 1: ...OPERATOR SMANUAL NSERIES Versu Ref no 39 893 21 3 08 2015 YOUR WORKING MACHINE...
Page 2: ......
Page 517: ......
