manualshive.com logo in svg

Valtra T series Versu, Operator'S Manual, Page: 67 / 450

Share
Download
Valtra T series Versu Operator'S Manual Download Page 67

3.2.10 

Using the rear window wiper and washer

The rear window wiper is extra equipment.
The switch for the rear window wiper and washer is located on the C-pillar.

1

GUID-C6B05D9E-0C0C-45F0-B379-DF47A9625461

1. Rear window wiper switch

•

To use the rear window wiper, turn the switch.
The wiper has an intermittent position and one speed.

•

To use the washer, press the switch.

3.2.11 

Using the rear window heater

Rear window heater is extra equipment.

OK

1

2

1

GUID-7A9E3401-C437-4B39-926D-F669934AF04B

1. Rear window heater button

3. Operation

- 66 -

Summary of Contents for T series Versu



































































































































































































































































































































































































































































Reviews:

No comments