![background image](http://html1.mh-extra.com/html/valtra/t-series-versu/t-series-versu_operators-manual_3412440411.webp)
5. Check that both lifting links are of the same length after the adjustment.
Correctly adjusted, the lifting links ensure that the rear linkage can be raised to its
uppermost position. The pick-up hitch is locked when the linkage is lowered to
the point where the hitch rests on the pawl. This prevents unnecessary loading
on the hydraulic pump and overheating of the oil.
4.8.10.2 Maintaining the automatic jaw of the wagon towing device
Maintain the automatic jaw of the wagon towing device regularly.
1
2
3
GUID-14A798F7-CB4C-43B4-8D03-EDD1AACF2B95
1. Control unit of the puller pin
2. Main pin
3. Locking pin (2 pcs)
•
Regularly clean the main pin, control unit of the puller pin and locking pins.
Do not use pressure wash when cleaning the main pin.
IMPORTANT: If the jaw is rusty, for example due to fertiliser, do not use a
rust-loosening agent for removing the rust but take it to an authorised Valtra
workshop.
4. Maintenance
- 410 -