manualshive.com logo in svg

Valtra T series Versu, Operator'S Manual, Page: 361 / 450

Share
Download
Valtra T series Versu Operator'S Manual Download Page 361

4.7.5.6 

Changing engine air filters

Change the main air filter and safety filter periodically.

2

1

GUID-E4D40011-78C9-461A-A7AC-5234502A3B76

1. Main air filter

2. Safety air filter

The safety filter protects the engine if the main air filter gets damaged.

IMPORTANT: Never run the tractor without the safety filter.

NOTE: Do not clean the filters. Always change the filters according to the

maintenance schedule.

NOTE: In extremely dusty conditions the engine air filters must be changed more

frequently.

NOTE: Unless it is necessary, do not open the cover of the air filter housing.

1. Open the air filter housing.

4. Maintenance

- 360 -

Summary of Contents for T series Versu



































































































































































































































































































































































































































































Reviews:

No comments