manualshive.com logo in svg

Valtra T series Versu, Operator'S Manual, Page: 284 / 450

Share
Download
Valtra T series Versu Operator'S Manual Download Page 284

3.23.6 

Agricultural drawbar

The agricultural drawbar (optional) is used without the pick-up hitch.

1

GUID-7C0D87A3-6EED-45AA-8870-A33EC5DDD993

1. Agricultural drawbar

The agricultural drawbar is used for towing implements where only part of the

implement weight is on the drawbar, for example balers. See the technical

specifications in this manual for the maximum weight of the drawbar implement.
Agricultural drawbar:
•

Adjustable to three different distances from the power take-off (PTO) shaft.

•

In all positions, the drawbar can also be adjusted ±12.5° and ±25° to either

side.

3. Operation

- 283 -

Summary of Contents for T series Versu



































































































































































































































































































































































































































































Reviews:

No comments