Home
/
Valtra
/
T series Versu
/
Operator'S Manual

Valtra T series Versu, Operator'S Manual, Page: 203 / 450

Share

Page: 203 / 450

Valtra T series Versu Operator'S Manual Download Page 203

2. Lift up the levelling screws and turn them in the required direction to adjust

the length of the lift links.

3. Lower the levelling screws back to the locked position after adjustment.

3.14.3.2 Adjusting hydraulic lift link

The hydraulic lift link is connected to the rear on/off valve 1 or 2.
IMPORTANT: When adjusting the hydraulic lift link, make sure that the implement

does not hit the tractor or ground to avoid damages.

1

2

GUID-D721C290-0FFA-41CD-A739-E5CE7B089D20

1. Switch for rear on/off valve 1

2. Switch for rear on/off valve 2 (optional)

1. Move the linkage to the position where the lift links are free of load.
2. Lift the hydraulic lift link up by pressing the side opposite to the symbol of the

switch for rear on/off valve 1 or 2.

3. Lower the hydraulic lift link down by pressing the symbol side of the switch

for rear on/off valve 1 or 2.

3. Operation

- 202 -

«
...
201
202
203
204
205
...
»

Summary of Contents for T series Versu



































































































































































































































































































































































































































































Reviews:

No comments