manualshive.com logo in svg

Valtra T series Versu, Operator'S Manual, Page: 202 / 450

Share
Download
Valtra T series Versu Operator'S Manual Download Page 202

3. Release the lock by pulling the lever forward.

GUID-B36612F7-C256-4F58-B5CC-DEEE19F33DF7

The ball joints lock automatically when attaching the implement.
When locked, the clamp is in view and the lever is in the lower position.

3.14.3 

Adjusting lift links

3.14.3.1  Adjusting lift links

IMPORTANT: When adjusting the lift links, make sure that they do not hit the

tractor or damage the implement.

1

GUID-69E882D5-6136-45CB-94A3-A69C10112801

1. Levelling screw

1. Move the linkage to the position where the lift links are free of load.

3. Operation

- 201 -

Summary of Contents for T series Versu



































































































































































































































































































































































































































































Reviews:

No comments