3.13.8
Using the lift/lower switch
When attaching implements, using the lift/lower switch gives you a full control on
the implement's movement. If necessary, you can stop the movement
immediately by releasing the switch.
The lift/lower switch functions even when the rear linkage is not activated.
1
GUID-D03E2D6E-BB12-4544-8985-0C61E0845115
1. Lift/lower switch
•
To lift the linkage, press the side of the lift/lower switch opposite to the
symbol.
The longer the switch is pressed the faster the linkage lifts.
•
To lower the linkage, press the symbol side of the lift/lower switch.
The longer the switch is pressed the faster the linkage lowers.
•
To stop the movement of the linkage, release the lift/lower switch to the
centre position.
NOTE: The linkage has to be activated again every time the lift/lower switch
or the lift/lower push buttons have been used, if necessary.
3.13.9
Using the lift/lower push buttons
When using the lift/lower push buttons, the lifting/lowering continues for as long
as you keep pushing the respective button. The movement stops immediately
when releasing the button. Thus, you have steady control over the linkage
movements.
3. Operation
- 190 -