manualshive.com logo in svg

Valtra HiTech T3 Series, Operator'S Manual

Share
Download
Valtra HiTech T3 Series Operator'S Manual Download Page 255

•

Tighten all screws and nuts of the front linkage after the first 15-25 running

hours.

•

Check that the hydraulic connections have no leaks.

•

Grease the lifting cylinder pins and the lifting links shaft with Universal

Grease every 50 hours.
The grease nipple for the lifting links shaft is located on the rear side of the axle.

1

GUID-47B9E928-6736-4DCB-8F01-80B42F67D74A

1. Grease nipples

4.7.3.5 

Checking the front power take-off

•

Tighten all fixing screws after the first 15-25 running hours.

•

Check regularly that all fixing screws are tight.

•

Check that the hydraulic connections have no leaks.

4. Maintenance

- 254 -

Summary of Contents for HiTech T3 Series



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands