Valtra HiTech T3 Series Operator'S Manual Download

Page: 125 / 370

8. Press the Powershift push button to select the driving start automatics

engagement time parameter.

GUID-B4F83C0E-FEAF-4F49-AA11-311B99C1103C

9. Change the parameter value by pressing Powershift push buttons.

GUID-A2273974-20E8-4D07-818D-246607F8A074

10. Press the HiShift push button to leave the setting menu and save all changes.

If you want to leave the setting menu and discard all changes made, turn the

ignition switch off.

3.8.26

Reverse drive system

You can use the rear and front controls in the reverse drive system.

WARNING: Using the rear controls: Before turning the seat to the

backward position, move the front power shuttle lever to the parking

brake position (position P). After this, you can turn the seat and

activate the rear controls using the rear power shuttle lever by moving

the parking brake on and off.

WARNING: Using the front controls: Before turning the seat to the

forward position, move the rear power shuttle lever to the parking

brake position (position P). After this, you can turn the seat and

3. Operation

- 124 -

Summary of Contents for HiTech T3 Series



















































































































































































































































































































































































Search results

Summary of Contents for HiTech T3 Series

Reviews:

Related manuals for HiTech T3 Series

Brands by name

Popular brands

Valtra HiTech T3 Series, Operator'S Manual

Search results

Summary of Contents for HiTech T3 Series

Reviews:

Related manuals for HiTech T3 Series

Brands by name

Popular brands