VAL
S
TEAM
ADCA
We reserve the right to change the design and material of this product without notice.
IMI ECRU E 01.18
4. TRANSPORT, HANDLING AND STORAGE
-
Handling and lifting of materials should be made with adequate eq
uipment’s and following the indications on this
instruction.
-
The manufacturer doesn’t assume the responsibility of damaged equipment due to inappropriate handling during
the transportation and storage.
•
The equipment should only be moved or lifted after draining all the fluid from inside, and from the pipping.
•
Do not damage the paint job. It protects against corrosion during transportation and storage. E
quipment’s should
be protected from impacts and forces during transportation and storage.
•
The eyebolt placed on top of the receiver are exclusively intended for its lifting and transport, and not for lifting
and transport of the whole unit.
•
For lifting and transportation of the complete unit use a suitable forklift truck underneath the frame with the forks
positioned according to the Figure 4.
•
If the equipment is to be shut off for a long period of time, care should be taken to avoid exposure to low critical
temperatures. It should also be isolated from dust accumulation.
•
If the equipment has been in use, follow the shut-down instructions before storage.
Fig. 4
– Example of fork positioning
