1) 2.4G Remote
Video
a) Set action camera to video mode.
b) To start recording, press and hold the video button. The camera will emit one beep and the
camera light will flash while recording.
c) Press the video button again to stop recording. The camera will emit one beep and the camera
light will stop flashing.
Photo
a) Set action camera to photo mode.
b) To capture a photo, press the photo button.
To power off camera, press and hold the photo button.
2) Operating the camera
Installing and removing battery
a) Pull back the back cover lock to release the battery cap.
b) Correctly install battery into action camera as indicated by +/- symbols and direction of arrowed
marked on battery.
Charging
a) Connect the USB cable to the computer of an adaptor to start charging.
b) While charging, a red indicator will be lit.
c) When the battery is full charged, the red indicator will go off.
Switching On/Off
a) Press and hold onto Mode/Power button for 3 - 5 seconds till welcome screen appears.
b) Press and hold onto Mode/Power button for 3 - 5 seconds till goodbye screen appears.
On/Off WiFi
a) Short press the up key to switch on.
b) Short press the up key to switch off.
Mode switching
a) After the action camera is switched on, short press the Mode/Power button to switch between
video recording / photo shooting / playback / setting.
b) Symbols of mode will be displayed on the top left of the screen.