Valor MADRONA MF28JN, Installation & Owner'S Manual

Page: 13 / 46

13 13
Remote Control Operation
SETTING PROGRAM TIMERS
• You can program two periods of time between 12:00
am and 11:50 pm in each 24-hour cycle.
• The Programs P1 and P2 must be set in the
following order during a 24-hour cycle: , ,
and .
• The icon indicates the beginning of the period (ON)
and the icon indicates the end of the period (OFF).
• If = or = , the programming
is cancelled.
• To keep the fi replace ON all night, set at
11:50 am and at 12:00 am.
Default settings:
Program 1: 6:00 am 8:00 am
Program 2: 11:50 pm 11:50 pm
• Brie fl y press SET button to scroll to
TIMER mode.
• Hold the SET button until
(sun) is displayed and the time
fl ashes.
• Brie fl y press SET button to scroll
to TIMER (moon) while the
time
fl ashes.
• Press (large fl ame) button to
set the hour.
• Press (large fl ame) button to set
the hour.
• Press (small fl ame) button to
set the minutes.
• Press (small fl ame) button to
set the minutes.
SETTING P1 ON TIME
SETTING P2 ON TIME
• Brie fl y press SET to scroll to TIMER mode
(sun) while the time fl ashes.
• Follow the instructions given to set P1 ON time.
SETTING P2 OFF TIME
• Brie fl y press SET to scroll to TIMER mode
(moon) while the time fl ashes.
• Follow the instructions given to set P1 OFF time.
Press OFF button to save these settings. The timers
are programmed. See the diagram on programming
sequences on the following page.
Tip
If you want to program only one period, program
and with desired times and program and
with the same time as .
SETTING P1 OFF TIME
P1
P1
P1
P1
P1
P1
P2
P2
P2
P2
P2
P2
P1
P1
P1
P1
P1
P1
P2
P2
P2
P2
P2
OWNER’S
INFORMATION