4
3. On the appliance, install the side panels as indicated
(3 x 1/2" screws per side).
4. Install the upper
fi
nishing strip under the
appliance`s case top edge:
With no HeatShift.
Remove the 3 screws retaining a
removable convection ba
ffl
e and slide the
fi
nishing
strip over the ba
ffl
e`s tabs, then secure the strip
and ba
ffl
e together using 3 countersunk screws
supplied.
ONLY
with HeatShift.
Remove the 3 screws retain-
ing the removable convection ba
ffl
e, remove the
ba
ffl
e, then slide the
fi
nishing strip over the screw
holes and secure it with 3 countersunk screws
supplied. Discard the convection ba
ffl
e.
NOTE
Use of the optional HeatShift System requires
the convection baffle to be removed above the
firebox. See Appliance Preparation, Optional
HeatShift or HeatShift section in Appendix D of
the appliance's installation manual.
5. Install the top panel as indicated (3 x 1/2" screws).
6. Ensure the appliance is snug against the framing
and secure it to the studs on each side (5
fi
points per side). Use wood screws (not supplied with
this kit).
7. Set aside the side doors, removable panel and bar-
rier screen to install later when the appliance’s set-
up and wall
fi
nish application are completed.
8. Continue the installation of the appliance as indi-
cated in the H5 Installation Manual.
