4000250-03
#751LTK
Lift Trim Kit
INSTALLATION INSTRUCTIONS
MUST be used with model 752BTK Base Trim Kit (sold separately)
Note:
This kit must be installed or serviced by a qualified installer, service agency or gas supplier. These
instructions are to be used in conjunction with the main installation instructions for the above listed models.
The Model 751LTK is a 2” high black sheet metal wrap
around riser that fits within the 752BTK Base Trim Kit
to make a finished riser with an overall height of 2”. The
751LTK can not be installed on it’s own and requires a
752BTK Base Trim to complete. Additional 751LTK’s can
be fastened together in 2” increments to make higher
risers. The Riser and Base Trim may also be used with
the 750OCP Oversized Closure Plate. The recessed
portion of the insert firebox will require shimming
(supplied by dealer) to match the height of the riser.
(The G3 Insert is approved for shimming constructed of
combustible material.)
Kit contents
Designed and Manufactured by / for Miles Industries Ltd.
190 – 2255 Dollarton Highway, North Vancouver B.C., CANADA V7H 3B1
Tel. (604) 984-3496 Fax (604) 984-0246 www.milesfireplaces.com
© Copyright Miles Industries Ltd., 2006
Because our policy is one of constant development and improvement, details may vary slightly from those given in
this publication.
