4005865-02
719BPB 4-Sided Backing Plate
Use with
716EH and 721ED Edgemont Trim and Door
fi tted to
Valor 700 Models only
The 719 4-Sided Backing Plate is intended to be used
with the 716 Edgemont Hammerered Trim Kits or the
721 Edgemont Door Kits to install on the Valor heater
model 700.
Please note the appliance will have to be raised
by 2-5/8” when using the 719BPB 4-Sided
Backing Plate as the plate extends below the
bottom of appliance.
719BPB with
721 Edgemont Door
© Copyright Miles Industries Ltd., 2016
INSTALLER
Leave this manual
with the appliance.
CONSUMER
Retain this manual
for future reference.
HOT GLASS
WILL
CAUSE BURNS.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW CHILDREN
TO TOUCH GLASS.
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
L
EGEND
G3.5
Installation Instructions
Mounting of the 719 does not aff ect clearances or other
specifi cations listed in the heater installation manuals—
see installation manual supplied with the heater for
more information.
700 engine
719BPB Backing Plate
Edgemont Door and side doors
Overview—shown with 721ED Edgemont Door
(engine, Edgemont Door Kit sold separately)
36-5/16” (922 mm)
1/2”
(13 mm)
1-1/2”
(38 mm)
29-1/4” (742 mm)
2-5/8” (67 mm)
between bottom of backing
plate and bottom of appliance
!
!
