4005086-02
1435 Three-sided Trim Kit
Use with
Valor 1400 Models only
The 1435 trim is intended to be used on Valor heaters
models 1400. Mounting of the 1435 does not affect
clearances or other specifi cations listed in the heater
installation manuals—see installation manual supplied
with the heater for more information.
Overview
1400 engine
© Copyright Miles Industries Ltd., 2016
46-1/4” (1175 mm)
36-3/4”
(933.3 mm)
Installation Instructions
I N S TA L L E R
Leave this manual
with the appliance.
C O N S U M E R
Retain this manual
for future reference.
HOT GLASS
WILL
CAUSE BURNS.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW CHILDREN
TO TOUCH GLASS.
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
Trim assembly
RH door
LH door
Removable panel
Linerbox bracket
Barrier screen
Note:
Mounting of this trim allows for non-combustible
material up to 3/4” (19 mm) thick installed over top of
the required 1/2” (13 mm) cement board. For thicker
fi nishes, refer to appliance manual.
H6 S
ERIES