Valloy Incorporation.
Any-002
User Manual
any-002
© 2015 Valloy Inc. All rights reserved.
Rev 1.0
– 2015.10
52 of 68
7) Lower the fuser into the printer, locating the two lugs (c) into their slots in the metal partition
which separates the fuser area from the image drums.
8) Push the two retaining levers (b) towards the rear of the printer to lock the fuser in place.
9) Finally, close the top cover and press down firmly at both sides so that the cover latches closed.
1-3 Cleaning
1-3.1 Clean the LED HEAD
- Clean the LED heads when printing does not come out clearly, has white lines or when text is
blurred.
