Valley VRI-iS, Installation Manual

Page: 65 / 102

65
Troubleshooting
ICON10 / ICON1
VRI-iS Diagnostics
Resync Valves
Use Resync Valves to manually re-synchronize the
duty cycle of all sprinkler banks.
NOTE
• The VRI-iS protocol must be enabled via RJ11
on the Comm Port screen.
The duty cycles of all valves will start over. Valves will
be staggered evenly within their managed zone. See
Figure 65-1.
1. Push
Menu
,
Programs
, and
VRI
to display the
VRI-iS screen. See Figure 65-1.
2. Push the
VRI-iS Diagnostics
button.
3. Push the Resync Valves button to re-synchro-
nize.
4. When prompted to initiate a valve resync, push
the
Yes
button.
1
2
3
4
5
6
Figure 65-1 1. Menu
2. Programs
3. VRI
4. VRI-iS Diagnostics
5. Sequence Valves
6. Yes