The Freedom Light
ä
Item #: TLL2
Please review all steps prior to mounting The Freedom Light
ä
.
Due to continuous product improvements for Steps 1 & 2 please follow the
instructions based on the model that you have purchased.
Model with Toggle ON/OFF Switch
Step 1:
FULLY CHARGE THE LIGHT FOR 48 HOURS.
Lights are shipped in the OFF
position with partially charged batteries. Remove the
cellophane cover from the solar panel. Keep the light in the OFF
position and place the
solar panel in direct sunlight for 48 hours prior to mounting it to the flagpole.
Step 2:
TEST THE LIGHT.
After fully charging the light, press down for the ON
position. Place your finger over the
light detector to test if the light is working. The light should shine immediately.
Model with Push Button ON/OFF Switch
Step 1:
FULLY CHARGE THE LIGHT FOR 48 HOURS.
Lights are shipped in the OFF position with partially charged batteries. Remove the
cellophane cover from the solar panel. Keep the light in the OFF position and place the solar
panel in direct sunlight for 48 hours prior to mounting it to the flagpole.
Step 2:
TEST THE LIGHT.
After fully charging the light, press once for the ON position. Place your finger over the light
detector to test if the light is working. The light should shine immediately.
Prior to mounting the light onto any pole, make sure
that The Freedom Light
ä
is turned ON
and that
you have removed the cellophane cover from the
solar panel.
Prior to mounting the light onto any pole, make sure
that The Freedom Light
ä
is turned ON and that you
have removed the cellophane cover from the solar
panel.
