Valiani OMNIA, Instruction And Maintenance Manual

Page: 37 / 66

OMNIA
33
6 CONTROLS DESCRIPTIONS AND PREPARATION FOR USE
All commands relating to the machine's work cycle come from the computer. However, there are some commands
that must be given directly from the machine and these are:
• Emergency button s.
• Power on switch
• Starting the vacuum pump and selection of the suction zones.
• Loading of materials to be processed.
• Material Pick-up Roller
6.1 EMERGENCY BUTTONS
The EMERGENCY buttons must be used to immediately stop the machine in case of DANGER to the operator or risk for
the machine itself. Each button has a mechanical stop to prevent the operator from accidentally pressing it again. To
reactivate normal operations, turn the EMERGENCY button a quarter of a turn clockwise to release the mechanical
stop. The machine is equipped with three emergency buttons (one on the loader and one on each of the two sides of
the machine), pressing any of these buttons causes any movement of both the machine and the loader to stop.
To reactivate the machine, all three buttons must be active. You will also need to press the power button again.
1
1
Figure 6-1