Valhalla Scientific 4314KV, Operation Manual

Page: 13 / 32

6
Option MP-2: Kelvin Mini-Probes
Option "MP- 2" is a 48"shielded lead set, handheld pencil type, terminated in spring loaded steel tips with
0.18" separation. (1 Amp max.)
Option MP-3: Kelvin Micro-Probes
Option "MP-3" is a 48" shielded lead set (dual banana), handheld pencil type, terminated in spring loaded
steel tips with .08" separation (1 amp max.). Special orders or modified versions available upon request.
Option MP-4/MP-5: Surface Probes
These probes permit rapid, repeatable bonding testing on a variety of screened or flat surfaces. Test
current is evenly distributed through the probe base while sensing is accomplished via a spring loaded
center contact. The "MP-4" target area is 1" in diameter. The "MP-5" target area is .4" in diameter.
Option KK: 4-Wire Kelvin Lead Set
Option "KK" is a 48" heavy duty cable set terminated in large "jaws" that have an open span of 2".
Option C: Banana-to-Clip Cable
Option "C" is a 48" shielded cable terminated in dual alligator clips
Option BBL: Banana-to-Banana Cable
Option "BBL" is a 48" shielded cable terminated in dual banana plugs at both ends.
Option KCS: Kelvin Clips
Option "KCS" is the gold plated Kelvin clips used on the Option "K" cable. These clips may be used when
making custom cables or when repairing Option "K".
Option JAWS: Heavy-Duty Clips
2" opening for use on large bushings, transformers and motors. The upper/lower jaw teeth (gold plated)
provide true 4-wire measurement. Can accommodate up to 150 amps.