Valentin WMX 5001, Operating Manual

Page: 25 / 32

Wipe-On Applicators Options
10.23 Operating Manual 25
6 Options
6.1 Product Sensor
The 'product sensor' option is used for optical, contact-free registration
of products in order to obtain input signals for the printing system.
A
C
B
Figure 14
A = Reflector
B = Connecting line
C = Reflexion photocell
NOTICE!
When using reflection photocells, please observe that other
light (e.g. working lamp) on the photocell is prevented.
1. Connect the connecting line (B) of the reflection photocell (C) to
the I/O 24 interface.
2. Attach the reflector (A) at right angles with the reflection photocell
(C).