Page 16
Installation Manual - SRF40
ENGLISH
FRAMING
PART B - INSTALLATION
3. Fireplace Installation
3.1 Safety Information
WARNING
Hot Wall surfaces! The Wall directly above the fireplace is constructed of non-combustible
materials and although safe, it may reach temperatures in excess of 250°F depending on
choice of trims or optionnal accessories. Do not touch. Finish the wall using materials
suitable for these temperatures.
3.2 Appliance Location
ROOM DIVIDER
INSTALLATION
FLUSH WALL
INSTALLATION
ISLAND
INSTALLATION
CABINET
INSTALLATION
CORNER
INSTALLATION
ANGLED CORNER
INSTALLATION
NOTE:
Island and Room Divider installation is possible
as long as the horizontal portion of the vent system
does not exceed 20 feet with a minimum vertical run
of 8 feet.
NOTE:
When installing this fireplace against an exterior
wall, insulate to applicable insulation codes. When you
install your direct vent fireplace in room divider or flat
on wall corner positions, a minimum of 4 ¼ inches
clearance must be maintained from the perpendicular
wall and the front opening of the fireplace.
3"
76mm
4 1/4"
108mm
45°
