1
947086
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
ISSUE 1
VIP-9831AL IP Indoor/Outdoor Stealth Horn
INTRODUCTION
The VIP-9831AL IP Stealth Horn is a
self-contained paging system which enables voice
paging hundreds of feet from an Ethernet connection.
The VIP-9831AL consists of a horn and
Network/Audio Interface allowing standalone
capability when used with a SIP enabled telephone
system or can be accessed from a variety of Valcom
managed VoIP products.
SPECIFICATIONS
Access Methods
SIP telephone system
PBX, FXO Port w/VIP-811A
POTS telephone set w/VIP-811A
PBX, FXS Port w/VIP-821A
Valcom M Cast Page Group
Features
RJ-45 network connection
Network activity LEDs
Power over Ethernet (PoE) 802.3af compatible
Dimensions/Weight
Horn Enclosure:
9.3 "H x 15.0 "W x 5.0 "D
(23.6 cm x 38.1 cm x 12.7 cm)
Weight: 5.5 lbs (2.05 kg)
Network Interface
1.62” H x 5.63” W x 3.45” D
(4.11 cm) x (14.30 cm) x (8.76 cm)
with brackets
– 8.22” W (20.87 cm)
Weight: 2.10 lbs. (0.95 kg)
Environment
Network Interface:
Temperature: +32 to +104°F (0 to +40°C)
Humidity: 0 to 85% non-precipitating
Indoor installation only
Horn Enclosure:
Temperature: -4 to +131°F (-20 to +55°C)
Humidity: 0 to 95% non-condensing
Indoor/Outdoor installation
Power
Via 802.3af PoE Ethernet Switch: Class 3
Precautionary Designations
INSTALLATION
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates uses
and can radiate radio frequency energy and if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area may cause
harmful interference in which case the user will
be required to correct the interference at his own
expense.
