Issue
1
1 947804
Issue 1
VIP-430A
IP WALL SPEAKER
INTRODUCTION
The VIP-430A IP Wall Speaker enables
handsfree talkback access to a single location
over an IP-based LAN/WAN. This allows a
handsfree talkback extension anywhere on the
network. The speaker levels are electrically
adjusted during setup. The enclosure is made of
steel with a durable gray powder coated finish.
The color of the enclosure can easily be changed
to match any decor. A detachable black clothe
grille is included. A call switch input is provided
for the remote speaker location signaling.
Power is provided to the VIP-430A via a Power
over Ethernet (PoE) switch meeting the 802.3af
specification.
DIMENSIONS/WEIGHT
10.13” H x 12.31” W x 4.63” D
(25.73cm x 31.27cm W x 11.75cm D)
Weight: 4.25 LBS (1.91 kg)
Environment
Temperature: 0 to +40° C
Humidity:
0 to 85% non-precipitating
Packing List
Qty. Item
1 VIP-430A
1 VSP
Document
INSTALLATION
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This
equipment generates, uses and can radiate
radio frequency energy and if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area may cause
harmful interference in which case the user
will be required to correct the interference at
his own expense.
Precautionary Designations
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified serv ice personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
