1
947762
Issue 3
VIP-402A, VIP-402A-EC
LAY-IN ONE-WAY IP CEILING SPEAKER
INTRODUCTION
The VIP-402A / VIP-402A-EC Lay-In One-way IP
Ceiling Speakers enable voice access to a single
zone of paging over an IP-based network. This
allows a page zone extension anywhere on the
network. The speaker output level is electrically
adjusted during setup. The lay-in ceiling speaker
grille is made of steel with a white baked enamel
finish. The VIP-402A replaces a 2’ x 2’ ceiling tile.
The VIP-402A-EC replaces a 600mm x 600mm
ceiling tile. Power is provided to the unit via a
Power over an Ethernet (PoE) switch meeting the
802.3af specification.
SPECIFICATIONS
Access Methods
PBX, FXO Port w/VIP-811
POTS telephone set w/VIP-811
PBX, FXS Port w/VIP-821
Valcom M Cast Page Group
SIP – enabled telephone system
Features
RJ-45 network connection
Power over Ethernet (PoE) 802.3af compliant
High Efficiency Class-D Amplifier
Environment
Temperature:
0 to +40° C
Humidity:
0 to 85% non-precipitating
Packing List
Qty. Item
1
Lay-in Ceiling Speaker
1 VSP
Document
INSTALLATION
Dimensions/Weight
VIP-402A:
23.75” L x 23.75” W x 3.75” D
(60.33cm) x (60.33cm) x(9.53cm)
Weight: 5.5 lbs. (2.49kg)
VIP-402A-EC:
594cm L x 594cm W x 9.53cm D
Weight:
2.49kg
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates uses,
and can radiate radio frequency energy and if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area
may cause harmful interference in which case
the user will be required to correct the
interference at his own expense.
