Valcom V-2901A User Manual Download Page 1

 

 

VSP-V-2901A 

 

 

Issue 4 

 

1

 

947301A 

 

 
 
 
 

 

V-2901A 

 

UNIVERSAL DOOR ANSWERING SYSTEM 

 
 
 

INTRODUCTION 

The V-2901A, Universal Door Answering System, 
when used with Valcom Doorplate Speakers, 
provides voice paging with handsfree reply to a door 
from any telephone location.  The V-2901A initiates 
ring-in on the telephone system and sends a 
confirmation tone to the door speaker.  The individual 
at the phone responding to the signal will determine if 
access should be allowed.  Pressing a programmed 
code on the telephone dialpad or pressing the remote 
button will unlock the door to allow admission.  The 
V-2901A also provides an alarm control output to 
alert an alarm system of an unauthorized entry. 
 
These instructions contain the specifications and 
information necessary to install, operate and maintain 
the Universal Door Answering System. 
 

FCC Notice

 

This equipment generates and uses radio frequency 
energy and if not installed and used properly, that is, 
in strict accordance with the instructions listed in this 
User's Manual, may cause interference to radio and 
television reception. 
 
It has been tested and found to comply with the limits 
for a Class B Computing Device in accordance with 
the specifications in Subpart B of Part 15 of the FCC 
rules, which are designed to provide reasonable 
protection against such interference in a residential 
installation.  If this equipment does cause interference 
to radio or television reception, which can be 
determined by turning off the equipment and seeing if 
the interference stops, the user is encouraged to try 
and correct the interference by one or more of the 
following measures: 

 
 
 
 

 

• 

Reorient the receiving antenna. 

• 

Relocate the equipment with respect to the radio 
or television. 

• 

Move the equipment further away from the radio 
or television. 

• 

Plug the equipment into a different branch 
circuit. 

 

NOTE:  The manufacturer is not responsible for 
any radio or TV interference caused by 
unauthorized modifications to this equipment.  
Such modifications could void the user's authority 
to operate the equipment. 

 

SPECIFICATIONS

 

Access

 

• 

Electronic Key Systems 

• 

PABXs 

• 

1A2 Key Systems 

• 

Stand Alone Systems 

 
Refer to Figure 1 for a simplified block diagram of a 
typical installation. 

 

 

Summary of Contents for V-2901A













Reviews: