background image

  Issue 5 

                

      947165 

P-TEC VOICE PAGING SPEAKERS

V-5330100 (VOICE COIL)

V-5330200 (70 VOLT)

INTRODUCTION 

P-TEC Voice Paging Speakers are suitable for
voice paging as well as background music.  The
V-5330200 is a 70 Volt model with adjustable taps
and volume control.  The V-5330100 is a voice coil
(45 Ohm) 3.4 Volt model with volume control.
P-TEC speakers consist of a 3.6 inch cone speaker
mounted in a unique surface-mount baffle.  The
baffle is designed for mounting on acoustic tile,
such as those normally found in suspended-
ceilings; and can be mounted without cutting large
holes in the tile.  The mounting pins can be
removed for mounting in a hard ceiling. The
speaker housing has screw holes for securing
speaker without mounting pins.  Although the
P-TEC speakers are designed especially for
standard suspended ceilings, they can be used on
many types of ceiling materials.

DIMENSIONS/WEIGHT 

8.00” Dia x 2.50” H (20.32cm x 6.35cm)

Voice Coil

   0.75 lbs. (0.34 kg)

70 Volt

       1.25 lbs. (0.57 kg)

INSTALLATION

 

Selecting the Power-Tap Wire (70V)

 

Note:

 

For the V-5330100 Speakers (Voice Coil), 

 begin at Suspended Ceiling Installation. 

1.

Remove the Quick-Connect connector from the
accessory pack.

2.

Select the desired power-tap wire:
Yellow  =  1/4W
Red      =  1/2W
Green   =  1W
White    =  2W
Blue      =  4W

Note:

  

Refer to spacing chart (Figure 6) for 

recommended speaker spacing. 

Figure 1. P-TEC Paging Speaker (70V shown)

 

3.

Install the Quick-Connect connector on the
wire. Use pliers to close the connector over the
wire.  The connector can be removed by prying
it open with a screwdriver, and can be reused
several times (See Figure 2).

Figure 2. Attaching the Reuseable Quick 
Connect Connector (V-5330200 only) 

4. Connect the power-tap wire to the gold (+)

terminal (See Figure 3).

Reviews: