Valcom IP Solutions VIP-802, User Manual

Page: 1 / 5

1 947987
ISSUE 5
VIP-802
DUAL ENHANCED NETWORK AUDIO PORT
INTRODUCTION
The VIP-802 Dual Enhanced Network Audio Port
enables voice access to two zones of one-way
paging over an IP network, allowing page zones
to be extended anywhere network connectivity is
available. The VIP-802 can be programmed as a
SIP (Session Initiation Protocol) device with two
identities (one per audio channel) for connectivity
to virtually any Voice over IP (VoIP) telephone
system.
SPECIFICATIONS
Features

2 Audio Outputs or Inputs

2 Form A relay contacts

2 Contact Closure Inputs

2 SIP identities for registering to a VoIP
telephone system

RJ-45 jack for network connection

Front panel activity LED

Provides audio for up to 40 Valcom one-way
amplified speaker assemblies per zone

AUX audio input via RCA jack

Contact closure or VOX operation of audio
inputs

VM-186 RJ-45 connectors provided for
audio and relay interface

Page with music output, music mutes during
page

Output control contact closure provided
during paging output

Compatible with 25 or 70 Volt amplifiers

2.5mm jack for optional DC power

Power over Ethernet (PoE) 802.3af compatible
Dimensions/Weight

1.75” H x 6.75" W x 9.5" D
(4.45cm H x 17.15cm W x 24.13cm D)

Weight: 1.75 lbs. (0.80 kg)
Nominal Specifications
Input Impedance: 600 Ohms
Input Level: -10dBm nominal
Voice Switch Sensitivity: -21dBm
AUX Input Impedance: 8 to 600 Ohms
AUX Input Level: -10dBm nominal
Output Impedance: 50 Ohms
Output Level: - 10dBm nominal
Relay Current: 1 AMP @ 24VDC
Nominal Power Requirements
Via back panel barrel connector:
Voltage: 24VDC
Current: 325mA
Via 802.3af PoE Ethernet Switch:
802.3af: Class 3
Environment
Temperature: 0 to +40° C
Humidity:
0 to 85% non-precipitating
Packing List
Qty Item
1 VIP-802
1 VSP
Document
2 Mounting Brackets W/ Hardware
4 Rubber Pads
2 RJ-45 Patch Cables
2 VM-186 RJ-45 Connectors