1
947836
ISSUE 2
VIP-580A / VIP-581A
IP FlexHorn Surface Mount
INTRODUCTION
The VIP-580A and VIP-581A IP FlexHorn
Surface Mount units enable loudspeaker voice
paging anywhere on an Ethernet network. The
VIP-580A/VIP-581A consists of a network-
connected high efficiency horn, allowing stand
alone capability when used with a SIP telephone
system or can be accessed from a variety of
Valcom managed VoIP products. Power is
provided to the VIP-580A or VIP-581A via a
Power over Ethernet (PoE) switch meeting the
802.3af specification.
SPECIFICATIONS
Access Methods
SIP telephone system
PBX, FXO Port w/Valcom Network
Station Port
POTS telephone set w/Valcom Network
Station Port
PBX, FXS Port w/Valcom Network Trunk Port
Valcom M Cast Page Group
Features
Power over Ethernet (PoE) 802.3af
compatible
Angled surface mount (VIP-581A)
Straight surface mount (VIP-580A)
Paintable grille and enclosure
Nominal Power Requirements
Via 802.3af (PoE) Ethernet Switch:
Class 3
Environment
Interior Installation only
Temperature: 0 to +40° C
Humidity:
0 to 85% non-precipitating
VIP-580A
VIP-581A
Dimensions/Weight
VIP-580A:
10.0” H x 12.2" W x 4.0" D
(25.4cm H x 30.9cm W x 10.2cm D)
Weight: 7.4 lbs. (3.4 kg)
VIP-581A:
9.9” H x 12.2" W x 4.0" D (top) x
2.7” D (bottom)
(25.2cm H x 30.9cm W x 10.2cm D (top) x
6.9cm D (bottom)
Weight: 7.4 lbs. (3.4 kg)
