MUS01210202
07/01/2020
MELTON, S.L.U. - POLIGONO INDUSTRIAL AGUSTINOS CALLE G-34,31160 ORCOYEN, NAVARRA
TEL: 00 34 948 321580 Fax: 00 34 948 326584 e-mail: [email protected]
47
WARNING: This machine should only be used by qualified
personnel who understand all the procedures and are familiar
with the necessary safety measures.
5.1. INTRODUCTION:
This chapter explains how to use the machine.
First of all, make sure that the person operating the machine is duly protected and
that all safety measures are being followed.
5.2. COMMISSIONING:
1. Press the on button.
2. Check that the machine adjustments are appropriate for the desired operation;
otherwise readjust them (see chapter 4).
3. When the machine is at the programmed temperature and there are no alarms
activated, the pump permission will turn on.
4. Permission from the main machine is given (in case they are connected). The
system has two terminals for external connections.
5. The application can start.
When the machine is
connected to a main machine, it won’t run
until the external permission is given.
These terminals are shorted at our factory.
Summary of Contents for D4-L
