Installing/Removing and using the front wheel forks
Your Runabout stroller utilizes our
unique and revolutionary new TRI-
MODE™ front swivel system:
1.
To install the front fork, rotate the
TRI-MODE selection dial to the
centre (45
0
) position.
2.
Tilt the stroller frame upward on
the rear wheels.
3.
Insert the fork shaft into the TRI-
MODE housing till it “clicks” into
place.
IMPORTANT: Always test that the fork
is securely engaged in the housing.
To remove the front fork:
1.
Rotate the TRI-MODE
selection dial to the centre
(45
0
) position.
2.
Tilt the stroller frame upward
on the rear wheels.
3.
Press the centre release
button. The fork will then be
released.
The unique TRI-MODE™ swivel system is as
flexible as it is functional over a variety of
terrains and uses.
1.
LOCK: This position is best for use on
extremely rough or soft terrain such
as sand etc which inhibit wheel swivel.
To lock your wheel, rotate the dial to
the “LOCK” position. Swivel the wheel
around till it locks into position.
2.
O
:
The central position locks the wheel
into a tight 45
0
swivel arc. This
provides more stability for use with a
toddlerseat or when going down
inclines.
3.
SWIVEL: This position allows full,
unfettered swivel action.
Folding/Opening your stroller
1.
Fold the hood back up against the
handle.
2.
Release the locking clamps at
either side of the stroller.
3.
Simultaneously lift the
secondary safety catch and
swing the handle forward.
4.
Holding the frame at the rear,
press down with your foot on
the rear basket tube. This will
disengage the side hinge locks.
5.
Continue pushing the rear of
the basket, moving the rear
wheels forward beneath the
frame.
1.
To open, unhook the frame
locking strap reversing the
previous step.
2.
Holding on to the side of the
footrest, with your foot
stopping the rear wheels, lift
the handle so that the frame
begins to unfold.
6.
You can lock the frame closed by
stretching the locking strap over
the frame, placing the metal
catch over the rivet on the
chassis