background image

Thank you for purchasing a quality VALCO BABY product. Please read and follow the instructions outlined in 

this guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand 

all the warnings and safety guidelines before use. 

Important: Please read the following instructions carefully before assembling this product. Retain this 

guide in a safe place for future reference. 

PRODUCT REFERENCE GUIDE

STROLLER

Due to our policy of continuous 

product development, this product 

is constantly evolving. It is possible 

that some features or procedures 

outlined here have changed since 

this document was written. If you are 

unsure of any procedure shown here, 

please contact us via the web at  

[email protected]

 to obtain the most 

up to date information before use. 

Include the batch number, which can 

be found on a sticker on the frame.

All pictures and diagrams herein are 

provided for illustration purposes only.  

Actual product, colour or fabric may 

vary. VALCO BABY reserves the right 

to modify or alter any specification 

or colour without notice or obligation 

to modify any product previously 

purchased

ION

© Copyright  

VE 2012

vs100412

FURTHER INFORMATION: 

www.valco.com.au

Find us on:

Summary of Contents for ION









Reviews: