VALBERG WF 914 B S180C, Instructions For Use Manual

Page: 20 / 218

13 EN
Using the appliance
B
Connect the drain hose
12. If the drain hose is already installed as in the diagram below.
Unhook it from the right-hand clip only (see arrow).
13. Connect the drain hose to the siphon or fasten it to the edge of a sink using the U-bend.
If it is not already installed, attach the U-bend (E) to the end of the drain hose.
NOTES:
• Make sure that the drain hose is not kinked.
• Secure the hose so that it cannot fall. After the washing
phase, the machine drains the hot water.
• Small washbasins are not suitable for this purpose.
• To lengthen the pipe, use a pipe of the same type and
secure the fittings with clips.
• Max. overall length of the drain hose: 2.50 m.