VALBERG DHP 8 A++ W205T, Instructions For Use Manual

Page: 35 / 136

28 EN
Useful information
C
Troubleshooting
Problem Cause Solution
Drying operation takes too
long.
Fibre filter (interior and
exterior filter) pores may be
clogged.
Wash the fibre filters with
warm water and dry.
Evaporator front side may
be clogged.
Clean the front side of the
evaporator
The ventilation grills in
front of the machine may be
closed.
Remove any object in front
of the ventilation grills that
blocks air.
Ventilation may be
inadequate because the are
the machine is installed in
is too small.
Open the door or windows
to prevent the room
temperature from rising
very high.
A lime layer may have
accumulated on the
humidity sensor.
Clean the humidity sensor.
Excessive amount of
laundry might be loaded.
Do not load the drying
machine excessively.
Laundry might not have
been wrung adequately.
Perform a higher speed
wringing on the
washing machine.
Clothes come out damp
after drying.
A program not suitable for
the laundry type may have
been used.
Check the maintenance
labels on the clothes and
select a program suitable
for the clothes’ type or use
time programs as extra.
Fibre filter (interior and
exterior filter) pores may be
clogged.
Wash the filters with warm
water and dry.
Evaporator front side may
be clogged. Evaporator front
side may be clogged.
Clean the front side of the
evaporator
Excessive amount of
laundry might be loaded.
Do not load the drying
machine excessively
Laundry might not have
been wrung adequately.
Perform a higher speed
wringing on the washing
machine.