VALBERG DHP 8 A++ W205T, Instructions For Use Manual

Page: 12 / 136

5 EN
Using the appliance
B
• Before the calling the nearest Authorized Service for the installation of the dryer, ensure that
electrical installation and water drain is appropriate referring to the user’s manual.If they are not
suitable, contact a qualified electrician and technician to make necessary arrangements.
NOTE:
Preparation of the dryer’s location as well as the electrical and waste water
installations is under customer’s responsibility.
WARNING!
• Prior to installation, visually check if the dryer has any defects on it. If the drier is damaged,
do not have it installed. Damaged products cause risks for your safety.
• Let your dryer wait for 12 hours before starting to use it.
Appropriate installation location
Install the dryer on a stable and level surface. Dryer is heavy. Do not move it by yourself.
• Operate your dryer in a well ventilated, dust-free environment.
• The gap between the dryer and the surface should not be reduced by the materials such as
carpet, wood and tape.
• Do not cover the ventilation grills of the dryer.
• There must not be a lockable, sliding or hinged door that may block the opening of the loading
door in the place where your dryer is to be installed.
• Once the dryer is installed, it should stay at the same place where its connections have been made.
When installing the dryer, make sure that its rear wall does not touch anywhere (tap, socket, etc.).
• Place the dryer at least 1 cm away from the edges of other furniture.
• Your dryer can be operated at temperatures b5°C and +35°C. If the operating conditions
fall outside of this range, operation of the dryer will be adversely affected and it can get damaged.
Installation