Operating Instructions, Form No. 105001, Back sheet 2 of 5
For Remote Controlled Pumps:
For Tandem Pumps:
With Remote Valve -
With Pump Mounted Valve -
1. Connect the pump to a remote 3-
way/4-way valve.
2. Connect the fluid line from the fluid
pressure port on the manifold to the
pump pressure port on the valve.
3. Connect the fluid line from the fluid
return port on the manifold to the
pump return port on the valve.
4. Connect the cylinder(s) to the valve.
IMPORTANT: On all single pressure
line applications, plug one port on
the valve.
1. Connect the por ts of the pump valve to
cylinder(s). When port "A" is pressurized,
port "B" becomes the return. When port "B" is
pressurized, port "A" becomes the return.
2. Place the valve into the "A" or "B" position in
order to pressurize the cylinder(s) or start the
pump.
Remote
Hand Control
Tee Adapter
Filter
Air
Hose
Hydraulic
Hose
Coupler
Coupler
Union Adapter
(swivel connector)
To Hydraulic
Hose
And Cylinder
Inline Hydraulic
High Pressure Gauge
Filler/Vent
Cap
Tee
Adapter
Lubricator
Three-strand
Air Hose
Single-acting
Cylinder
Air
Filter
Male
Fitting
Inline Air
Pressure
Gauge
Air
Hose
Air Filter
Position A
Position A
Hold
Hold
Position B
Position B
Port B
Port A
Ports
Port B
Plugged
Pressure
Return
PA60
Pump
PA64
Pump
Valve and Manifold
Ports are 3/8" NPTF
Air Inlet
Port-1/4" NPTF
Air Inlet
Port-1/4" NPTF
Air Lubricator
Air
Pressure
Regulator
Oil Fill
and
Vent
Port
Position A -
Pressure to
cylinder port A, cylinder
port B to tank.
Hold -
Neutral, all ports
blocked.
Postion B -
Pressure to
cylinder port B, cylinder
port A to tank.
B
A
B
A
