Vaisala SPS311, Technical Reference

Page: 39 / 59

Chapter 5 ____________________________________________________Updating the Software
VAISALA _______________________________________________________________________ 39
Checking the Software Version of MRP111
To check the software version installed on MRP111 card, do the
following:
1. Switch on the Sounding Workstation and the SPS311 and wait
until the system is ready for operation.
2. Place the Update CD into the CD-ROM drive of the
workstation.
3. Select Start , Run and click the Browse button.
4. Locate the CD-ROM drive and go to folder <CD-ROM
drive>\MRP111 , click the verinfo.exe and click Open . Click
OK .
5. A command line window opens. Write the IP address of the unit
you are checking and press ENTER. The default IP address for
the unit is 192.168.0.10.
6. The program checks the version of embedded software. When it
is done, version information of Hardware, Embedded NT Image
and Application is displayed. After that, the text "Press any key
to continue!" is displayed. Press any key and the window will
close.
MPU121/MPU112/MPU111 Software Update
The update CD contains latest version of unit software for
MPU121/MPU112/MPU111.
CAUTION Power must be on all the time while the update is in progress.
Switching off the unit before the update is finished may cause serious
malfunction.
1. Switch on the Sounding Workstation and the SPS311 and wait
until the system is ready for operation.
2. Place the Setup CD into the CD-ROM drive of the Sounding
Workstation and click
Start , select Run and click the Browse
button.