Vaisala RVP900, User Manual

Page: 369 / 484

4. Print the file or ftp it to a computer that supports a printer.
/usr/sigmet/config
Hardcopy Listings
1. Print the following files or ftp them to a computer that supports printing:
• setup_dsp.conf
• rvp900.conf
• softplane_dsp.conf
Backup /usr/sigmet/config directory
Checklist
Table 110 Backup and Hardcopy Checklist
Task Checked OK/Not OK Remarks
Test procedure completed successfully.
Test Passed
For Customer Date:
For Vaisala Date:
A.26 RVP901 TxDAC Stand-alone Bench
Test
Test Goal
Verify that the RVP901 TxDAC electrical I/O is working properly in an isolated environment.
Test Equipment
IRIS dspx utility
IF signal generator
Test Procedure
1. Enter the TTY setups through dspx .
2. Run dspx and temporarily revert to factory settings with f .
3. In the Mb menu, choose an intermediate frequency that matches the RVP901 analog
output filters (for example, 60 MHz) and a Blackman window.
Receiver Intermediate Frequency: 60.0000 MHz
Design/Analysis Window– 0:Rect, 1:Hamming, 2:Blackman : 2
Appendix A – Installation and Test Procedures
367