background image

User's Guide ______________________________________________________________________

32 __________________________________________________________________ M210987EN-C

Transportation

Vaisala radiosondes must be transported in their original shipping 
packages. These packages are designed and built to survive and protect 
their contents in the environmental conditions described herein with the 
terminology and standards per standard: IEC 60721-3-2. The 
transportation of radiosondes requires climatic conditions 2K2 and 
mechanical conditions 2M1 of this standard:

-

Transportation in weather-protected conditions.

-

Transportation using conventional means (car, truck, and/or 
aircraft), with free fall not exceeding 0.25 m in any circumstances.

-

Following additional markings on packaging.

Do not transport the radiosonde with the battery connected.

Transporting Lithium Batteries and 
RS92 Radiosondes

RSB611 lithium batteries and RS92 radiosondes with lithium batteries 
are classified as:

-

UN 3090 Lithium metal batteries

-

UN 3091 Lithium metal batteries packed with equipment

Consignments must be packed, labeled, and documented according to 
the IATA packing instructions.

When transporting the radiosondes with lithium batteries, take the 
following requirements into account:

-

The package must display a lithium battery handling label, see 

Figure 21 on page 33

 for an example. The original radiosonde 

shipping should be used for transport, and it already has the lithium 
battery handling label.

-

The consignment must include a document indicating the lithium 
content, describing proper handling and procedures for damaged 
packages, and a telephone number for additional information. The 
original radiosonde consignment includes a SHIPPER'S 
DECLARATION FOR ARTICLES NOT REGULATED AS 

Summary of Contents for RS92-D















































Reviews: