User's Guide ______________________________________________________________________
36 ___________________________________________________________________M210983EN-A
0812-020
Figure 14
Graphic History
Recording Data
You can record measurement data into the memory of the MI70
indicator, and view it later on the display. You can also use the MI70
Link program to transfer and view the data on a PC.
To start the data recording:
1.
Open the
Recording/Viewing
menu. You can get to this menu
directly from the basic view by pressing the
Record
shortcut
button.
2.
Select
Memory status
and press
Show
to check the currently
available space for recordings. Press
OK
to exit from the memory
status view.
3.
Select
Record data
.
4.
Check the currently selected recording
Interval
, and press
Set
to
adjust it. The MI70 indicator will record the values of the currently
selected quantities at this interval (for example, one minute).
5.
Check the recording
Duration
, and press
Set
to adjust it. If you
select
Memory full
, the recording will continue until memory is
presents the maximum recording times for
each interval with one, two and three recorded quantities.
6.
Select
Start/Stop recording
, and press the
Start
button to start the
recording. If you chose "Memory full" as the duration, you see the
maximum recording time on the display. You can also delete files
in order to empty the memory. Press
Start
again to accept
maximum recording time.
The recording indicator will appear in the basic view when a
recording is ongoing.
