background image

Table of contents

PRODUCT DESCRIPTION................................................................................ 1

OPERATION

................................................................................................ 2

Operating voltage .................................................................... 2

Tilting frame ............................................................................ 3

Battery ..................................................................................... 3

RS232 ...................................................................................... 3

RS485 ...................................................................................... 4

LED Indicators......................................................................... 4

ASSEMBLING THE CASE AND AN EXISTING BAROMETER ........................... 5

TECHNICAL DATA........................................................................................... 7

Electronics............................................................................... 7

Electromagnetic compatibility ................................................. 7

Battery ..................................................................................... 7

Housing ................................................................................... 7

Accessories............................................................................. 7

Summary of Contents for PTB220TS / CASE











Reviews: