User's Guide ______________________________________________________________________
256 _________________________________________________________________ M210667EN-C
The transmitter unit beeper is selected by pressing
T
.
The receiver unit beeper is selected by pressing
R
.
The user has to select whether the beeper shall be switched on or off.
BEEPER TRANSMITTER O(N)/OF(F) or
BEEPER RECEIVER O(N)/OF(F)
The beeper is switched on by pressing
N
.
The beeper is switched off by pressing
F
.
The result can be read at the displayed values at
Beep.
Frequency (Advanced Command Level only)
CAUTION
Changes to the Main Transmitter Modulation Frequency can result in
loss of performance to the LT31 system. Only trained or advised users
shall use this feature.
The Main Transmitter Modulation Frequency can be increased,
decreased, set to a fixed value, or written to the EEPROM of the main
transmitter module.
Select the command by pressing
D
.
The user has to select whether to increase, decrease, write the current
value to the EEPROM of the main transmitter module or to set a fixed
value.
FREQ (+)/(-)/(W)RITE/(V)ALUE
The Main Transmitter Modulation Frequency is increased by pressing
+
.
The Main Transmitter Modulation Frequency is decreased by pressing
-
.
The current Main Transmitter Modulation Frequency is written to the
EEPROM of the main transmitter module by pressing
W
.
The Main Transmitter Modulation Frequency is set to a fixed value by
pressing
V
.
When the Main Transmitter Modulation Frequency is set to a fixed value,
the user has to give the desired frequency.
MAIN FREQUENCY TO SET (GIVE NUMBER):