User's Guide ______________________________________________________________________
188 _________________________________________________________________ M210667EN-C
Message 6 - FD12 Message 7 Emulation
!
FD 1
"
00 1850 2000 /// // // // ////// ////// //// 23.3
01100
-*
-*
-*
#-*
Message 7 - MITRAS Emulation
"
ID 1 V 1850 B 595 S4101
-*#
Message 8 - SKOPOGRAPH II Flamingo
"
S0TA" 948 1850 -108189 587 R0100 10 5
33 00 00 00
-*$
Manual Simulation Message
The user can define the entire content of the message body which is the
string between the
S
X
(start of the text) character and the
E
X
(end of the
text) character. The message string must be given after the
SIMULATE
MANUAL_MESSAGE
command in the following way:
SIMULATE MANUAL_MESSAGE
string
The LT31 sensor does not make any validity checks to the message body
content which means that the message is transmitted as it is written.
Special characters can be added to the message by using the following
notations:
\c
Message counter (incrementally increased by a sent message)
\n New
line
\r CR
\t TAB
\s Space
\[ [
\] ]
\xXX
Character corresponding to hexadecimal XX
An example of a manual simulation message is presented below:
The command
SIMULATE MANUAL_MESSAGE this\sis\stestmessage
sends the following message:
!
LT
"
this is testmessage
#
CSUM
$-*
.