3. Configure the
RAIN-N
product:
Rain1
Specify the product name of the input hourly
RAIN1
product by selecting the
Rain1
button and choosing from a list of products or by typing the name in the
field.
When you enter a product name, the associated task information is displayed in
the
TASK Summary
portion of the menu.
Hours
Specify the number of hours to integrate. When the product runs, it integrates
data for the last
N
hours.
If a
RAIN1
product is missing for one of the hours in the interval, the algorithm
assumes that no rain fell during that hour. The product output shows how many
hours were integrated.
Color Scale
,
Levels
, and
1st Level/Step
The color levels can be specified, but the resolution is fixed by the resolution of
the
RAIN1
configuration.
More information
‣
Hydromet Raingage Correction Overview (page 363)
3.13.1 Scheduling RAIN-N Products
The
Data Time
that you specify when you schedule the product are quantized to the time
value in the product configuration for the nearest interval that ends the integration.
Use the
Skip Time
field if you want only the accumulations for specific time intervals. You
can set the skip time to any multiple of the accumulation period. For example, if you want a
3-hour integration only for the periods ending at 03:00, 06:00, 09:00, ..., set the
Skip Time
field to 03:00.
The scheduling algorithm for the
RAIN-N
product looks for the arrival of the most recent
RAIN1
product (after the "current hour") and then runs the
RAIN-N
algorithm.
There are 2 cases that the product scheduler must handle, that is, the
RAIN1
product arrives
or does not arrive.
Note that in the time-line figures below:
• The horizontal line represents the data time of the
RAIN1
products that is always
exactly on the ending hour.
•
R
represents an input
RAIN1
product.
•
R*
represents the current hour
RAIN1
product whose arrival triggers the
RAIN-N
product to run.
• The vertical bars represents even hours.
The examples are for the case of a 4-hour integration.
IRIS Product and Display User Guide
M211319EN-H
60
RESTRICTED
Summary of Contents for IRIS
