5. Configuring analog outputs
5.1 Analog output configuration overview
The transmitter has 3 analog outputs that can be configured with the Insight PC software.
Each output has the same set of configuration options in the analog output 1 — 3 menus under
the
Configure Device
menu (
Analog output 1
shown in example).
The available selections depend on the probe that is connected to the transmitter
(for example, CO
2
output parameter selection is only available for CO
2
probes).
Figure 14 Analog output configuration options example
The
Analog output type
selection in the
General
menu defines whether the
outputs are used for voltage or current output.
Indigo201 User Guide
M212842EN-B
28
