4.3 Insight PC software overview
1
2
3
4
Figure 11 Insight software main menu view with Indigo200 transmitter and connected probe
1
Select
to access Insight main menu.
•
Configure Device
: display and graph options, output and relay settings, parameter
and unit selection, environmental compensation settings, filtering factor, probe
options, and general settings.
•
Export Settings
: creates a text file export of the device settings.
•
Calibrate
: options for calibrating and adjusting the measurement of the connected
probe, adjusting outputs, viewing adjustment data, and restoring factory
adjustments.
• Various reset, factory default settings, and restart options for transmitter and
probe.
•
About Device
: general device information such as serial number and software
version.
2
Select
Settings
to switch between the
Basic Mode
and
Advanced Mode
user modes,
change the units of parameters (metric/non-metric), enter a factory code to access
restricted functionalities, or view information about the Insight software.
3
Monitoring
provides options for monitoring and recording selected parameters, and
exporting the monitoring data as a CSV (comma-separated values) file.
4
Device information menu with the following tabs:
•
Measurements
: measurement graph view with parameter drop-down selection.
•
Calibration information
: read-only information about the latest stored calibration.
•
Diagnostics
: troubleshooting and administrative information about the device
status. Also includes options for exporting the device error log and other
diagnostics information as files (CSV/ZIP). When contacting Vaisala support, it is
recommended to include an up-to-date export of the error log with the support
request.
Chapter 4 – Using Indigo201 with Insight PC software
25
