Chapter 5 ______________________________________________________________ Maintenance
VAISALA _______________________________________________________________________ 49
Table 8
Error Messages
Error Message
Action
Voltage error
T meas error
Internal error, can be caused by
damage to the sensor.
F meas error
Internal error, can be caused by
damage to the sensor.
Voltage too low error
Supplied operating voltage is too low
for reliable operation.
Voltage too low for mA output
Supplied operating voltage is too low
for reliable operation of the analog
current output.
Voltage is too low for V output
Supplied operating voltage is too low
for reliable operation of the analog
voltage output.
Ambient temperature error
Ambient temperature out of operating
range (probably too hot).
Program flash check sum error
Internal error
Parameter check sum error
Internal error
INFOA check sum error
Internal error
SCOEFS check sum error
Internal error
CURRENT check sum error
Internal error
Unknown error
Technical Support
For technical questions, contact the Vaisala technical support:
+358 9 8949 2790
Return Instructions
If the product needs repair, please follow the instructions below to speed
up the process and to avoid extra costs to you.
1.
Read the section Warranty on page 8.
2.
Contact a Vaisala Service Center or a local Vaisala representative.
The latest contact information and instructions are available from
www.vaisala.com. Addresses of the Service Centers are provided
in section Vaisala Service Centers on page 50.
Please have the following information on hand:
- serial number of the unit
- date and place of purchase or last calibration
- description of the fault
