User's Guide ______________________________________________________________________
28 __________________________________________________________________ M210934EN-B
Device Information and Status
Show Device Information
The
?
command outputs a listing of device information. If you wish to
display the listing for all devices on the current serial line, issue the
command
??
.
?
<cr>
??
<cr>
Example:
>?
MMT162 0.92
Serial number : G0000002
Batch number : D0720012
Module number : ????????
Sensor number : C6010000
Sensor model : Humicap L2
Cal. date : YYYYMMDD
Cal. info : NONE
Time : 00:21:19
Serial mode : STOP
Baud P D S : 4800 E 7 1
Output interval: 2 S
Serial delay : 0
Address : 0
Pressure : 1.0132 bar
Filter : 0.800
Ch1 output : 0 ... 20 mA
Ch2 output : 0 ... 20 mA
Ch0 error out : 0.000 mA
Ch1 error out : 0.000 mA
Ch0 aw lo : 0.00
Ch0 aw hi : 1.00
Ch1 T lo : -20.00 'C
Ch1 T hi : 80.00 'C
Show Firmware Version
Use the
VERS
command to display software version information.
Example:
vers
MMT162 1.02
